Huaxiao Metal Corporation Limited.

316L 316 Cold Rolled Stainless Steel Coils(0.2mm-8mm)

Sample of 316L 316 Cold Rolled Stainless Steel Coils(0.2mm-8mm)

316 Same grade from different country standard:

06Cr17Ni12Mo2 0Cr17Ni12Mo2 S31600 SUS316 1.4401

316 Chemical component  ASTM A240:

C: ≤0.08, Si: ≤0.75, Mn: ≤2.0, S : ≤0.03, P: ≤0.045, Cr: 16.0~18.0, Ni: 10.0~14.0, Mo: 2.0-3.0, N: ≤0.1

316 mechanical property  ASTM A240:

  • Tensile strength: > 515 Mpa
  • Yield Strength: >205 Mpa
  • Elongation(%): > 40%
  • Hardness: < HRB95

316L Same grade from different country standard

1.4404 022Cr17Ni12Mo2 00Cr17Ni14Mo2 S31603 SUS316L

316L Chemical Component  ASTM A240 :

C: ≤0.03, Si: ≤0.75, Mn: ≤2.0, S: ≤0.03, P: ≤0.045, Cr: 16.0~18.0, Ni: 10.0~14.0, Mo: 2.0-3.0, N: ≤0.1

316L Mechanical Property  ASTM A240:

  • Tensile strength: > 485 Mpa
  • Yield Strength: >170 Mpa
  • Elongation(%): > 40%
  • Hardness: < HRB95

General Description of 316 Stainless Steel

316 is a special stainless steel, due to the addition of Mo elements to corrosion resistance, and high-temperature strength has greatly improved, high temperature up to 1200-1300 degrees, can be used under harsh conditions.

316 Stainless steel coil rolled coil Application

The main uses are paper and papermaking equipment, heat exchangers, dyeing equipment, film processing equipment, pipelines, building exterior materials in coastal areas. also used in the field of solenoid valves, housings, clamps, ball, valve body, seat, nut, stem and so on.

316 stainless steel other features

  • Corrosion resistance
    316 Corrosion resistance is better than 304 stainless steel, in the pulp and paper production process has good corrosion resistance. And 316 stainless steel is also resistant to the erosion of the oceans and the aggressive industrial atmosphere.
  • Heat resistance
    316 stainless steel has good oxidation resistance for intermittent use below 871 ° C (1600 ° F) and continuous use above 927 ° C (1700 ° F). It is best not to continuously use 316 stainless steel in the range of 427 ° C-857 ° C (800 ° F-1575 ° F), but stainless steel possesses excellent heat resistance when 316 stainless steel is continuously used outside this temperature range. 316L stainless steel carbide precipitation performance better than 316 stainless steel, available in the above temperature range.
  • Heat treatment
    Annealing is performed at a temperature in the range of 850-1050 ° C followed by rapid annealing followed by rapid cooling. 316 stainless steel cannot be hardened by heat treatment.

316 stainless steel Welding Performance

316 stainless steel with good welding performance. All standard welding methods can be used for welding. Welding can be used according to the purpose, respectively 316Cb, 316L or 309Cb stainless steel filler rods or welding electrodes. In order to obtain the best corrosion resistance, the welded section of 316 stainless steel needs to be annealed after welding. If 316L stainless steel is used, no post-weld annealing is required.

Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:+86-21-54725826
  • FAX:+86-21-54717930
  • EMAIL:[email protected]
  • ADDRESS:Room 458, Building 8-9, NO.1500 South Lianhua Road, Shanghai, China.