Hot Rolled Stainless Steel Coil (1.2mm-16mm)

Home/Stainless Steel Coil/Hot Rolled Stainless Steel Coil (1.2mm-16mm)

Hot Rolled Stainless Steel Coil (1.2mm-16mm)

  • 201 is a high manganese content, the surface is bright with a dark bright, high manganese content easily rust. 304 contains more chromium, the surface is matte, does not rust. There are two kinds of put together.
  • 2205 stainless steel weldability is very good. 2205 duplex stainless steel pipe to achieve the performance of the weld metal and thermal deterioration of the base metal and still maintain the same corrosion resistance, strength, and toughness.
  • This 2507 stainless steel combines the characteristics of austenitic and ferritic stainless steels. Compared with ferrite, it has higher plasticity and toughness, no brittleness at room temperature, significantly improved resistance to intergranular corrosion and welding performance, and at the same time retains iron.
  • 304L stainless steel prices higher than 304 stainless steel, 304L stainless steel is low carbon stainless steel, mainly for the welding process.
  • 310S high temperature, 321 corrosion is quite good in the case of high temperatures or 310S is more suitable for the maximum temperature can reach 1200 °C, oxidation resistance, corrosion resistance, acid and alkali, high temperature performance is much better than 321.
  • 316l steel is a molybdenum-containing stainless steel. Due to the molybdenum content in the steel, the overall performance of the 316L stainless steel is better than that of 310 and 304 stainless steel. Under the condition of high temperature, 316L stainless steel has a wide range of usage.
  • 321 stainless steel is a Ni-Cr-Mo type austenitic stainless steel, its performance is very similar to 304, but due to the addition of metallic titanium, it has a better resistance to grain boundary corrosion and high temperature strength. Due to the addition of metallic titanium, it effectively controls the formation of chromium carbide.
  • 409 409L Stainless steel coil rolled coil Application 409L stainless steel with excellent corrosion resistance, suitable for extending the life of vehicles and car lightweight, and as recycling of environmentally friendly materials, GM, Ford, Volkswagen, DaimlerChrysler and other major automobile manufacturers in the exhaust system 100% stainless steel.
  • These grades increase corrosion resistance by adding molybdenum. Typical applications include hot water tanks, solar water heaters, automotive exhaust systems, electric heating kettles and microwave oven components, automotive trim strips, and outdoor panels. The corrosion resistance of 444 steel is comparable to 316.
  • 430 is a ferritic stainless steel, 430 16Cr is a representative type of ferritic steel, thermal expansion rate, excellent formability and oxidation resistance. Heat-resistant appliances, burners, household appliances, type 2 cutlery, kitchen sinks, exterior trim materials, bolts, nuts, CD rods, screens.
  • Precipitation-hardening stainless steel was developed by the United States Steel Corporation in the 1940s. It has high strength after precipitation hardening heat treatment, plasticity and corrosion resistance is superior to other stainless steel.
Go to Top