Huaxiao Metal Corporation Limited.
banner
Product
Stainless Steel Coil
Stainless Steel Sheets (0.05mm-8mm)
Stainelss Steel Plate (1.2mm-200mm)
Stainless Steel Strip (0.05mm-10mm)
Decorative Stainless Steel Sheets
Stainless Steel Bar & Wire
Updates
Advantages and Applications of Colored Stainless Steel Sheets
Research Says Cooking Oil Can Make Stainless Steel Surfaces Antibacterial
Canada'S First Anti Dumping Review Of China'S Steel Pile Pipe Industry Affirmed Final Damage
The European Union Carries Out Protective Tariffs On Steel
Thailand Strengthens Control Over Chinese Steel Products That Are Transported To The United States V

202 Cold Rolled Stainless Steel Coil

Huaxiao Capacity about 202 cold rolled stainless steel coil, 202 CRC

Thickness: 0.2mm - 3.0mm
Width: 600mm - 1500mm, the narrowed products pls check in strip products
Max coil weight: 10MT
Coil ID: 508mm, 610mm
Finish: 2B, 2D
  • Advantage

202 Same grade from different mill standard

202 L4, 202 J4, 202 J3

202 Chemical component  LISCO – L4 :

C:≤0.15 ,Si :≤1.0 Mn:7.0-10.0 ,Cr:14~16.00 ,Ni:3.5~6.5, S :≤0.03 ,P :≤0.06 Cu: < 2.0 , N≤0.2

202 mechanical property  LISCO – L4:

Tensile strength :  > 515 Mpa
Yield Strength :  >205 Mpa
Elongation (%):  > 35%
Hardness: < HRB95

Description about 200/202 serial stainless steel


The advantage price is better than 304 stainless steel, most of the 200 series stainless steels sold on the Chinese market have almost no control of sulfur and carbon content in accordance with national standards, and manganese (and nitrogen) has replaced some or all of nickel to produce lower nickel content austenitic stainless steels.

The disadvantages of this series of materials are: less than 18% of the chromium content and the low nickel content do not balance the formation of ferrite, for which the chromium content in the 200 series stainless steel is reduced to 13.5% to 15%, some The situation dropped to 13% to 14%, and its corrosion resistance could not be compared with 304 and other similar steels. In addition, manganese, and in some cases copper, reduce the effect of repassivation under the acidic conditions common in the corrosion sites of the deposition zone and crevices. The destruction rate of 200 series steel under these conditions is approximately 10-100 times that of 304 stainless steel. The residual sulfur content and carbon content in these steels are often not controlled during production, and the material cannot be traced back to the source, even in material recycling. If Cr-Mn steels are not specified, they will become a dangerous scrap mixed raw material, leading to castings containing unexpectedly high levels of manganese.
Leave a Message Email Us

we will contact you within 24 hours.

Related Products
  • Precision Stainless Steel Coil

    Precision Stainless Steel Coil

    December 12, 2017Huaxiao Capacity about Precision stainless steel coilFinish: 2B,BA,TRTEMPER/Hardness: ANN, 1/2, 3/4, FH/Full hard, EH,SEH/Super EHThickness: 0.03mm – 1.5mmWidth: 600mm - 1250mm, the narrowed product...view
  • 410/410s Cold Rolled Stainless Steel Sheets (0.2mm-8mm)

    410/410s Cold Rolled Stainless Steel Sheets (0.2mm-8mm)

    August 10, 2018Huaxiao Capacity about 410 410s cold rolled stainless steel sheets, 410 410s CRCThickness: 0.2mm - 8.0mmWidth: 100mm - 2000mmLength: 500mm – 6000mmPallet weight: 25MTFinish: 2B,2D410 Similar grade fr...view
  • Stainless Steel Channel Bar

    Stainless Steel Channel Bar

    August 10, 2018Huaxiao capacity about stainless steel Channel barSize : 5# - 40#, 40 x 20 - 200 x 100Standard: GB1220, ASTM A 484/484M, EN 10060/ DIN 1013 ASTM A276, EN 10278, DIN 671Grade: 201, 304, 316, 316L, 310s...view
  • TEL:+86-21-54725826
  • FAX:+86-21-54717930
  • EMAIL:export@huaxiao-ss.com
  • ADDRESS:Room 458, Building 8-9, NO.1500 South Lianhua Road, Shanghai, China.