316L stainless steel sheet, but when 316L stainless steel is continuously used outside this temperature range, the stainless steel has good heat resistance. 316L stainless steel has better carbide precipitation resistance than 316 stainless steel and can be used in the above temperature range.
316/316L cold rolled stainless steel sheets(0.2mm-8.0mm)
Cold Rolled 316L/316 Stainless Steel sheets(0.2mm-8mm), 316 Stainless Steel Sheet Suppliers | Manufacturer | Exporter
Huaxiao Capacity About 316L Cold Rolled Stainless Steel Sheet 316 Grade Stainless Steel Sheets
Thickness: 0.2mm – 8.0mm,etc.
Width: 300mm – 6000mm, the narrowed products pls check in strip products
Package Weight: 1.0-3.0MT, etc.
Finish: 2B,2D, BA, etc
Hot Sell Sizes of 316 Ss Sheet Metal
- 3mm 316 stainless steel sheet
- 20 gauge 316 stainless steel sheet
- 1mm 316 stainless steel sheet
- 2mm 316 stainless steel sheet, etc.
316L/316 Stainless Steel Data Sheet
316 Stainless Steel Sheet Same grade from different country standard
06Cr17Ni12Mo2 0Cr17Ni12Mo2 S31600 SUS316 1.4401
316L Stainless Steel Sheet Same grade from different country standard
1.4404 022Cr17Ni12Mo2 00Cr17Ni14Mo2 S31603 SUS316L
316L 316 Grade Stainless Steel Sheet Chemical Component ASTM A240 :
316l 316 Stainless Steel Sheet Mechanical Property ASTM A240 :
|Grades||Tensile Strength||Yield Strength||Elongation (%)||Hardness|
|Ss 316||> 515 Mpa||>205 Mpa||> 40%||< HRB95|
|Ss316l||> 485 Mpa||>170 Mpa||> 40%||< HRB95|
Material Specifications of 316l 316 Stainless Steel Sheet
|Stainless Sheet||316, 316L||5524, 5507||A666, A240||SA480, SA240||Cold Rolled(2B)||0.290|
General Description about 316L/316 Stainless Steel Sheet
What is 316l Stainless Steel?
316L is a kind of molybdenum-containing stainless steel. Due to the molybdenum content in steel, the total performance of this steel is better than that of 310 and 304 stainless steel. Under high-temperature conditions, when the concentration of sulfuric acid is lower than 15% or higher than 85%, 316L stainless steel has a wide range. use. 316L stainless steel also has good resistance to chloride attack and is therefore commonly used in marine environments.
316L stainless steel sheet has a maximum carbon content of 0.03 and can be used in applications where annealing is not possible and maximum corrosion resistance is required.
Corrosion resistance is better than 304 stainless steel, with good corrosion resistance in the production process of pulp and paper. Moreover, 316L stainless steel is also resistant to erosion by marine and aggressive industrial atmospheres.
316L stainless steel has good oxidation resistance in intermittent use below 1600 ℃ and continuous use below 700 ℃. In the range of 800-1575 degrees, it is best not to continue to act. 316L stainless steel, but when 316L stainless steel is continuously used outside this temperature range, the stainless steel has good heat resistance. 316L stainless steel has better carbide precipitation resistance than 316 stainless steel and can be used in the above temperature range.
The solution annealing is performed in a temperature range of 1010-1150 degrees, and then rapidly cooled. 316L stainless steel cannot be hardened by heat treatment.
How to Choose 316 or 316L Stainless Steel Sheet
When deciding whether to use 316l or 316 stainless steel sheet for your application, it is important to consider the following factors:
316L is the best choice for high corrosion and high-temperature applications. Since 316L has less carbon content than 316 stainless steel sheet, it has better resistance to intergranular corrosion, which means that, unlike 316 stainless steel, its welds will not rot.
316 Stainless Sheet Price Or Cost
Although 316L stainless steel contains less carbon, the 316 stainless sheet price, and 316L stainless steel sheet price is about the same.
316 stainless steel has a very low response to magnetic fields. Unlike basic ferromagnetic stainless steels, most stainless steel varieties (including 316) are austenitic-or actually non-magnetic.
However, some 316 stainless steel products can be subjected to processes such as cold forming and welding, in which the austenite crystal structure is transformed into ferromagnetic martensite. 316L steel is easier to obtain a certain degree of magnetism.
316L stainless steel has good welding properties. All standard welding methods can be used for welding. When welding, 316Cb, 316L, or 309Cb stainless steel filler rods or welding rods can be used for welding according to the application. For best corrosion resistance, the welded section of 316 stainless steel requires post-weld annealing. If 316L stainless steel is used, post-weld annealing is not required.
Both types of stainless steel can be used in various industries. However, 316 is mainly used in construction and infrastructure because it is strong, pitting, and corrosion resistant in most cases. 316L is widely used in pharmaceutical and photographic equipment because it can withstand welding and corrosive chemicals.