304/304L cold rolled stainless steel sheets

Home/Stainless Steel Sheet/Plate/Stainless Steel Sheets(0.05mm-8mm)/304/304L cold rolled stainless steel sheets

304/304L cold rolled stainless steel sheets

The 304 stainless steel cold-rolled sheet is calendered on the basis of a stainless steel hot-rolled sheet (annealed pickling is generally No. 1 surface). Generally there are 2B, 2D two surfaces, 2D surface is rough, 2B surface is matte, finer, 98% on the market is 2B surface, so generally speaking, stainless steel cold-rolled sheet refers to stainless steel cold-rolled sheet 2B surface.

Sample of 304/304L Cold Rolled Stainless steel sheets, 304 stainless steel sheet
Huaxiao Capacity about 304 cold rolled stainless steel sheets

Thickness: 0.2mm – 8.0mm

Width: 300mm – 1500mm, the narrowed products pls check in strip products

Length: 1000mm-6000mm

Finish: 2B/2D/BA/NO.8, etc.

304 Stainless Steel Sheet Same grade from different country standard

304 S30408 06Cr19Ni10 0Cr18Ni9 S30400 SUS304 1.4301

304 Stainless Steel Sheet Chemical component ASTM A240 :

C:≤0.08 ,Si :≤0.75  Mn :≤2.0 ,Cr :18.0~20.0 ,Ni :8.0~10.5,

S :≤0.03 ,P :≤0.045 N≤0.1

304 Stainless Steel Sheet Mechanical Property ASTM A240 :

Tensile strength : > 515 Mpa
Yield Strength : >205 Mpa
Elongation (%): > 40%
Hardness: < HRB92

304L Same grade from different country standard

304L 1.4307 1.4306 SUS304L 022Cr19Ni10 00Cr19Ni10 TP304L S30403

304L Chemical component ASTM A240:

C:≤0.03 ,Si :≤0.75  Mn :≤2.0 , Cr :18.0~20.0 ,Ni :8.0~12.0,

S :≤0.03 ,P :≤0.045 N≤0.1

304L mechanical property ASTM A240:

Tensile strength(Mpa): > 485
Yield Strength (Mpa): 170
Elongation (%): > 40%
Hardness: < HRB90

General Description about 304L/304 Stainless Steel Sheet

Compare to coil, strip, the 304L/304 stainless steel sheet is also the most commonly used material, usually sheets be used by punching and bending as certain size for all kinds of application.

The stainless steel cold-rolled sheet is calendered on the basis of a stainless steel hot-rolled sheet (annealed pickling is generally No. 1 surface). Generally there are 2B, 2D two surfaces, 2D surface is rough, 2B surface is matte, finer, 98% on the market is 2B surface, so generally speaking, stainless steel cold-rolled sheet refers to stainless steel cold-rolled sheet 2B surface. The stainless steel wire drawing plate is processed on a 120#, 180# or even 240# 320# drawing machine on the surface of stainless steel 2B, 2D and even NO.1.

Since the hot-rolled surface generally has a large sand hole, it is not suitable as a decorative material and is only used in a very small number of specific industries. Since the stainless steel cold-rolled sheet (especially the surface of 2B) itself has a smooth surface and the effect of the drawn drawing board is good, the stainless steel drawing board which is commercially available is generally made of stainless steel 2B surface.

The stainless steel cold-rolled sheet refers to a steel sheet which has been cold-treated, pickled, and smoothed by a matte roll. Generally used for rust, corrosion and decoration.

Stainless steel cold rolling can be divided into four states: low cold work hardening (DY), semi-cold work hardening (BY), cold work hardening (Y) and special cold work hardening (TY).

We will answer your email in 24 hours!

Inquiry

We will answer your email in 24 hours!

Go to Top