Huaxiao classify about stainless steel bar & wire:
Stainless steel Flat Bar
Thickness: 3mm-40mm, 1/8" - 5/8"
Width: 20mm-120mm, 1" - 4.1/2"
Standard: ASTM A276/484M , EN 10058/DIN 1017, EN 10278/DIN 174
Stainless steel Round Bar
Diameter: 3mm-480mm, 1/8" to 2 1/4"
Standard: GB1220, ASTM A 484/484M, EN 10060/ DIN 1013 ASTM A276, EN 10278, DIN 671
Stainless steel Square Bar
Size: 5x5mm – 60x60mm
Standard: ASTM A276/484M, A582, EN 10059/DIN 1014, EN 10278/DIN 178
Stainless steel Hexagonal Bar
Size: 8mm - 60mm
Standard: ASTM A276/484M，EN 10278/DIN 176
Stainless steel Channel Bar
Size: thickness 3mm-12mm,height 25mm - 100mm,width 50mm-245mm
Standard: ASTM A276/A 484M，EN 10279
Stainless steel Angle Bar
side width: 25x25 - 100x100,thickness:3mm - 12mm
Standard: GB4227, ASTM A276/A 484M, EN10056/DIN 1028
Stainless steel Wire Rod
Hot rolled, size:5.5-20mm, Standard: GB/T 4356, ASTM A555/A555M, JIS G4308
Cold drawn, size:1-12mm, standard: H9-H11 or ASTM A484
Description about stainless steel bar
Stainless steel bar is made of stainless steel ingot, hot rolled or forged.
stainless steel bar: 316 stainless steel containing molybdenum and
carbon content is low, in the ocean and chemical industry environment
pitting resistance is much better than 304 stainless steel! (316L low
carbon, 316N nitrogen high strength, 316F stainless steel high sulfur content, easy to cut stainless steel.
stainless steel bar: As a low-carbon 304 steel, in general, the
corrosion resistance and 304 similar, but after welding or stress
relief, its excellent resistance to grain boundary corrosion, without
heat treatment can also be Maintain good corrosion resistance.
stainless steel bar: Has good corrosion resistance, heat resistance,
low temperature strength and mechanical properties, stamping, bending
and other hot workability, no heat treatment hardening phenomenon. Uses:
tableware, cabinets, boilers, auto parts, medical equipment, building
materials, food industry (temperature -196 ° C-700 ° C).
stainless steel bar: The main features are: high temperature, the
general use of the boiler, the car exhaust pipe. Other general
303 stainless steel bar: by adding a small amount
of sulfur, phosphorus, making it more machinable than 304, the other
properties and 304 and similar.
302 stainless steel bar: 302 stainless steel bar is widely used in auto parts, aerospace, aerospace hardware, chemicals.
As follows: Crafts, bearings, slippery flower, medical equipment,
electrical appliances and so on. Features: 302 stainless steel ball is
austenitic steel, and 304 are closer, but the higher the hardness of
302, HRC ≤ 28, with good rust and corrosion resistance.
stainless steel bar: good ductility, for molding products. It can also
be hardened by mechanical processing. Good weldability. Anti-wear and
fatigue strength is better than 304 stainless steel.
stainless steel ball is austenitic steel, and 304 are closer, but the
higher the hardness of 302, HRC ≤ 28, with good rust and corrosion
202 stainless steel bar: belongs to chromium - nickel - manganese austenitic stainless steel, performance better than 201 stainless steel.
201 stainless steel bar: a chromium-nickel - manganese austenitic stainless steel, magnetic relatively low.
408 stainless steel bar: good heat resistance, weak corrosion resistance, 11% Cr, 8% Ni.
stainless steel bar: the cheapest model (Anglo-American), usually used
as a car exhaust pipe, is a ferritic stainless steel (chrome steel).
stainless steel bar: belongs to martensite (high strength chromium
steel), good wear resistance, corrosion resistance is poor.
416 stainless steel bar: Adding sulfur improves the processability of the material.
stainless steel bar:" cutting tool" martensitic steel, similar to
Briggs high chrome steel the earliest stainless steel. Also used for
surgical tools that can be done very brightly.
steel bar: ferritic stainless steel, decorative, for example, for
automotive accessories. Good formability, but poor temperature
resistance and corrosion resistance.
440 stainless steel bar:
High-strength cutting tool steel, carbon slightly higher, after
appropriate heat treatment can get higher yield strength, hardness can
reach 58HRC, is the most hard of stainless steel. The most common
application example is the "razor blade." There are three commonly used
models: 440A, 440B, 440C, in addition to 440F (easy processing type).
Stainless Steel Application:
used for aircraft engine blades, casing, fasteners, combustion chamber,
disk, shaft, combustion chamber wall, liquid oxygen kerosene engine,
projectile, steam bottle, propulsion device. Widely used in aerospace,
aviation, nuclear energy, nuclear energy, petroleum, chemical industry,
and food, environmental protection, marine development, boiler heat
exchanger and other fields.