Huaxiao Metal Corporation Limited.
Stainless Steel Coil
Stainless Steel Sheets (0.05mm-8mm)
Stainelss Steel Plate (1.2mm-200mm)
Stainless Steel Strip (0.05mm-10mm)
Decorative Stainless Steel Sheets
Stainless Steel Bar & Wire
Advantages and Applications of Colored Stainless Steel Sheets
Research Says Cooking Oil Can Make Stainless Steel Surfaces Antibacterial
Canada'S First Anti Dumping Review Of China'S Steel Pile Pipe Industry Affirmed Final Damage
The European Union Carries Out Protective Tariffs On Steel
Thailand Strengthens Control Over Chinese Steel Products That Are Transported To The United States V

409/409L Cold Rolled Stainless Steel Sheets (0.2mm-8mm)

Huaxiao Capacity about 409 409L cold rolled stainless steel sheets, 409 409L CRC

: 0.2mm - 8.0mm

 100mm - 2000mm

 500mm – 6000mm

Pallet weight:

  • Advantage

409 Similar grade from different country standard

S40930  1.4512  0Cr11Ti

409 Chemical Component :
C:≤0.08, Si:≤1.0, Mn:≤1.0, S:≤0.03, P:≤0.045, Cr:10.5~11.7, Ni:0.5 Max, Ti:6xC – 0.75

409 Mechanical Property :
Tensile strength :  > 380 Mpa
Yield Strength :  >205 Mpa
Elongation (%):  > 20%
Hardness:  < HRB88
Bending Angle: 180 degree

409L Same grade from different country standard
S40903  00Cr11Ti  022Cr11Ti SUH409L

409L Chemical Component :
C:≤0.03,Si:≤1.0,Mn:≤1.0, S:≤0.03,P:≤0.045,Cr:10.5~11.7,Ni:0.5 Max,Ti:6xC – 0.75

409L Mechanical Property :
Tensile strength :  > 380 Mpa
Yield Strength :  >205 Mpa
Elongation (%):  > 20%
Hardness:  < HRB88
Bending Angle: 180 degree

Description about normal stainless steel sheets

Stainless steel does not cause corrosion, pitting, rust or wear. Stainless steel is also one of the strongest materials in building metal materials. Because stainless steel has good corrosion resistance, it enables structural components to permanently maintain engineering integrity. Chromium-containing stainless steel also combines mechanical strength and high extensibility, making it easy to machine parts to meet the needs of architects and structural designers.

Application about stainless steel sheet

Most of the requirements for use are to maintain the original appearance of the building for a long time. When determining the type of stainless steel to be used, the main considerations are the required aesthetic standards, the corrosive nature of the location atmosphere, and the cleaning system to be used. However, more and more applications are only seeking structural integrity or water impermeability. For example, the roof and side walls of industrial buildings. In these applications, the cost of building the owner may be more important than aesthetics, and the surface is not very clean. The use of 304 stainless steel in a dry indoor environment works reasonably well. However, in rural areas and cities to maintain their appearance outdoors, they need to be cleaned frequently. In heavily polluted industrial areas and coastal areas, the surface can be very dirty and even rusted. However, in order to obtain an aesthetic effect in an outdoor environment, nickel-containing stainless steel is required. Therefore, 304 stainless steel is widely used in curtain walls, side walls, roofs and other architectural applications, but in aggressive industrial or marine atmospheres, 316 stainless steel is preferred. The advantages of using stainless steel in structural applications are now well recognized. There are several design guidelines including 304 and 316 stainless steel. Because "duplex" stainless steel 2205 has a good resistance to atmospheric corrosion and high tensile strength and elastic strength, this steel is also included in the European guidelines. In fact, stainless steel is manufactured in full-standard metal shapes and sizes, and there are many special shapes. The most commonly used products are made of sheet and strip steel, and special products are produced from medium and heavy plates, for example, hot-rolled structural steel and extruded structural steel. There are also round, elliptical, square, rectangular and hexagonal welded or seamless steel tubes and other forms of products, including profiles, bars, wires and castings.
Leave a Message Email Us

we will contact you within 24 hours.

Related Products
  • Precipitation Hardening Hot Rolled Stainless Steel Coil

    Precipitation Hardening Hot Rolled Stainless Steel Coil

    April 22, 2018Grade about normal precipitation hardening hot rolled Stainless steel coilsS17400 17-4PH 0Cr17Ni4Cu4Nb S15500 15-5PH 0Cr15Ni4Cu4Nb S17700 17-7PH 0Cr17Ni7Al 17-10P 0Cr17Ni7AlS17400 Chemical componen...view
  • Precision Stainless Steel Strip

    Precision Stainless Steel Strip

    December 12, 2017Huaxiao Capacity about Precision stainless steel stripGrade: 301, 430, 410, 420, 304, 304H, 304L, 305, S316, 316H, 316L, S321, 321H, 332, 334, 409, 439 S30100 , S43000 , S41000 , S42000 , S30400 , S30...view
  • 310s Cold Rolled Stainless Steel Coil

    310s Cold Rolled Stainless Steel Coil

    April 22, 2018310/310s Same grade from different standard1.4841 S31000 SUS310S 1.4845 S31008 S31008S 06Cr25Ni20 0Cr25Ni20 high temperature stainless steelS31008 Chemical component ASTM A240 :C:≤ 0.08 ,Si: ≤1.5 Mn: ≤ 2...view
  • TEL:+86-21-54725826
  • FAX:+86-21-54717930
  • ADDRESS:Room 458, Building 8-9, NO.1500 South Lianhua Road, Shanghai, China.