Huaxiao Metal Corporation Limited.
Stainless Steel Coil
Stainless Steel Sheets (0.05mm-8mm)
Stainelss Steel Plate (1.2mm-200mm)
Stainless Steel Strip (0.05mm-10mm)
Decorative Stainless Steel Sheets
Stainless Steel Bar & Wire
Advantages and Applications of Colored Stainless Steel Sheets
Research Says Cooking Oil Can Make Stainless Steel Surfaces Antibacterial
Canada'S First Anti Dumping Review Of China'S Steel Pile Pipe Industry Affirmed Final Damage
The European Union Carries Out Protective Tariffs On Steel
Thailand Strengthens Control Over Chinese Steel Products That Are Transported To The United States V

2205 Hot Duplex Stainless Steel Plate

Huaxiao Capacity about 2205 hot rolled stainless steel plate, 2205 PMP

Thickness: 1.2mm - 200mm

Width: 600mm - 3200mm, the narrowed products pls check in strip or flat bar products

Length: 1000mm-12000mm

Finish: NO.1, 1D, 2D, #1, hot rolled finished, black, Anneal and pickling, mill finish

  • Advantage

2205 Same grade from different standard

S31803  S32205  S22053  022Cr23Ni5Mo3N  022Cr22Ni5Mo3N  1.4462  SUS329j3L  S22253  duplex stainless steel

S31803Chemical component  ASTM A240:

C: ≤ 0.03, Si: ≤1.0, Mn: ≤ 2.0, Cr: 21.00~23.00, Ni: 4.5~6.5, S: ≤0.02, P: ≤0.03, Mo: 2.5-3.5, N: 0.08-0.2

S31803  mechanical property ASTM A240:

  • Tensile strength: > 620 Mpa
  • Yield Strength: >450 Mpa
  • Elongation (%): > 25%
  • Hardness: < HBS 293

Description of 2205 stainless steel plate

205 Duplex Stainless Steel or 2205 alloy is a duplex stainless steel made of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy and others. It has high strength, good impact toughness and good overall and local resistance to stress corrosion.

Features about 2205 stainless steel plate

  • Duplex Stainless Steel 2205 Compared with 316L and 317L austenitic stainless steels, 2205 is superior in anti-pitting and crevice corrosion resistance. It has high corrosion resistance. Compared with austenite, its thermal expansion Coefficient lower, thermal conductivity higher.
  • Duplex Stainless Steel 2205 has twice the compressive strength of austenitic stainless steel, allowing designers to reduce their weight compared to 316L and 317L. The 2205 alloy is especially suitable for use in the -50 ° F / + 600 ° F temperature range and can be used for lower temperatures under severe restrictions (especially for welded construction).

Corrosion resistance of 2205 stainless steel plate

  • Uniform corrosion, The corrosion resistance of 2205 is superior to 316L and 317L in most environments due to chromium content (22%), molybdenum (3%) and nitrogen content (0.18%).
  • Local anti-corrosion, The content of chromium, molybdenum, and nitrogen in duplex steel 2205 makes it highly resistant to pitting and crevice corrosion in oxidizing and acidic solutions.
  • Anti-stress corrosion, The 2205 duplex structure of stainless steel helps to improve the resistance to stress corrosion cracking of stainless steel. In a certain temperature, under the conditions of tension, oxygen, and chloride, chloride stress corrosion occurs in austenitic stainless steel. As these conditions are not easily controlled, the use of 304L, 316L, and 317L is limited in this regard.
  • Anti-corrosion fatigue, Dual-phase steel 2205 high strength and corrosion resistance to high corrosion resistance fatigue strength. The processing equipment is susceptible to corrosive environments and loading cycles, and the 2205 features are well suited for such applications.

Metallography about 2205/S31803 plate

The chemical composition of the 2205 duplex steel gives the desired microstructure of 50 α / 50 γ after 1900 ° / 1922 ° F (1040 ° / 1080 ° C) solid solution annealing. If the heat treatment temperature is higher than 2000 ° F, may lead to an increase in ferrite composition. Like other duplex stainless steels, 2205 alloys are susceptible to intermetallic phase precipitation.

The intermetallic phase precipitates between 1300 ° F and 1800 ° F and precipitates fastest at 1600 ° F. Therefore, we need to test 2205, to ensure that no intermetallic phase, the test reference ASTM A 923.

Leave a Message Email Us

we will contact you within 24 hours.

Related Products
  • 301 Cold Rolled Stainless Steel Coil

    301 Cold Rolled Stainless Steel Coil

    April 22, 2018301 Same grade from different mill standard1.4310 SUS301 06Cr17Ni7301 Chemical component ASTM A240 :C:≤0.15 ,Si :≤1.0 Mn:2.0 ,Cr:16~18.00 ,Ni:6.0~8.0, S :≤0.03 ,P :≤0.045 , N≤0.1301 mechanical property Tensile strength : > 515 MpaYield Strengt...view
  • 201 Cold Rolled Stainless Steel Coil

    201 Cold Rolled Stainless Steel Coil

    April 22, 2018201 Same grade from different mill standard201J1, 201 L1, 201 LH, 201 LA201 Chemical component LISCO – L1 :C:≤0.15 ,Si :≤1.0 Mn:8.0-10.5 ,Cr:13.5~16.00 ,Ni:1.0~3.0, S :≤0.03 ,P :≤0.06 Cu: < 2.0 , N≤0.2 201 mechanical property LISCO – L1:Tensile...view
  • Stainless Steel Square Bar

    Stainless Steel Square Bar

    August 10, 2018Huaxiao capacity about stainless steel square barSize : 3mm-200mm, 1/8" to 8"Standard: GB1220, ASTM A 484/484M, EN 10060/ DIN 1013 ASTM A276, EN 10278, DIN 671Grade: 201, 304, 316, 316L, 310s, 430, 40...view
  • TEL:+86-21-54725826
  • FAX:+86-21-54717930
  • ADDRESS:Room 458, Building 8-9, NO.1500 South Lianhua Road, Shanghai, China.